DDS Automation Private Limited

 1734-OW4 is an Allen-Bradley POINT IO module. This module is a Relay output module featuring Four (4) Normally Open (N.O.) SPST Relay contact outputs. The contact outputs are rated 5-30 VDC; 120 VAC and 250 VAC. This module has a POINTBus current draw of 90 mA @ 5DVC. It requires use of 1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS terminal base for mounting and wiring the module.This description is written by DDS Automation .

Allen-Bradley 2085-OW16 is a Micro800 relay output module. This module features Sixteen (16) AC / DC relay output channels that operate at nominal voltages of 120VAC, 240VAC, 240VAC, 24VDC and 125VDC. This module is compatible for use with Micro850 and Micro870 Programmable Logic Controllers

Allen-Bradley/Rockwell Automation 2080-OB4 module is a Micro 800 series digital output module. It comes with 4 digital output channels. The 2080-OB4 digital output module can be mounted on a terminal base and it does not have a built-in enclosure for protection. Its minimum on-state voltage rating is 10 Volts DC, its nominal on-state voltage rating is 24 Volts DC, and its maximum on-state voltage rating is 30 Volts DC. The 2080-OB4 digital outpu

 Allen-Bradley/Rockwell Automation 2085-IF4 input module is a 4-channel analog input module. It is manufactured by Allen-Bradley in the Micro 850 controller series. The 2085-IF4 analog input module operates with a removable terminal block. Its bus current draw ratings are 100 milliamps at 5 Volts DC and 50 milliamps at 24 Volts DC. The 2085-IF4 analog input module

2085-IF8 input module is an analog input module with 8 channels from the Allen-Bradley/Rockwell Automation Micro 850 series. It can be mounted on a DIN Rail and it functions with an RTB or Removable Terminal Block. The 2085-IF8 analog input module needs to be protected from electrostatic discharge and it needs to be installed with enough clearance around it for proper airflow to avoid overheating