DDS Automation Private Limited

Service Centre of all kind of Automation products such as PLC (Programmable Logic Controller), AC Drives, DC Drives, SMC’s (Smart Motor Controllers), Intelligent Cards and all kind of electrical hardware used in Automation of Industries. 

We are Quality Management System  Company, which provides end-to-end Complete Solution to our Customers. 

We are a group of technical experts, who have experience of more than two decades in M/s Rockwell Automation (I) Ltd., in repairing of all kind of electronics hardware and have been got trained abroad in U.S.A.

Allen-Bradley/Rockwell Automation 2080-RTD2 module is a Micro 800 RTD module that has 2 channels that are not isolated. It is a plug in module that is easy to install on a Micro 800 series controller. The 2080-RTD2 non-isolated RTD module is compact so that it can fit easily onto the host controller without increasing the controller?s footprint. It supports 14-bit resolution. The 2080-RTD2 non-isolated RTD module

2085-OB16 output module is an expansion output module that has been manufactured by Allen-Bradley/Rockwell Automation in the Micro 850 controller series. It has 16 source-type transistor outputs. The 2085-OB16 expansion output module?s output voltage rating is 12/24 Volts DC. . The 2085-OB16 expansion output module has an operating voltage range of 10 to 30 Volts DC.

Allen Bradley 2085-ECR Micro800 Expansion Module End Cap.Bulletin 2085 Micro800™ Expansion I/O modules extend the capabilities of the Micro850® and Micro870® controllers by maximizing flexibility of the I/O count and type. The I/O module snaps firmly to the right side of Micro850 and Micro870 controllers, supporting both DIN rail and panel mount.This description is written by DDS Automation .

Allen-Bradley 2080-IQ4OB4 input and output module is a digital input and output module from the Micro 800 PLC series. It is a plug-in type of input and output module that is made to be plugged into a programmable logic controller or PLC to provide it with additional input and output points. The 2080-IQ4OB4 input and output module is approved for safe operation in hazardous locations in North America. This module has no built-in enclosure.This description is written by DDS Automation .

 2080-L50E-48QWB is a Micro 850 Programmable Logic Controller (PLC). This controller comes with embedded 48 Point I/O channels specifically, twenty-eight (28) 12/24 Volt inputs; twenty (20) relay outputs, and six (6) High-Speed counters. It has an embedded 24 Volt DC power supply and USB 2.0 non-isolated port, as well as one (1) RJ-45 that supports Ethernet/IP Class 3, and Modbus TCP/IP at transmission rates of 10/100 Mbps.

2080-L50E-24QWB is a Micro 850 Programmable Logic Controller (PLC). This controller comes with embedded 24 Point I/O channels specifically, eight (8) high-speed 24 Volt and six (6) standard 24 Volt inputs, both input types supporting sink/source configuration and 24 Volt AC as well. It also has ten (10) relay outputs and four (4) high-speed counters. It has an embedded 24 Volt DC power supply and USB 2.0 non-isolated port and one (1) RJ-45 that supports Ethernet /IP Class 3, and Modbus TCP/IP at transmission rates of 10/100 Mbps.

2085-IQ16 input module is a Micro 850 series 16-point input module from Allen-Bradley/Rockwell Automation. Its 16 input points are all rated at 12/24 Volts DC. The 2085-IQ16 input module can be mounted on a DIN Rail and it can receive input data from up to 16 input devices at a time. It also operates with a removable terminal block or RTB and it ships with 2 RTBs. The 2085-IQ16 input module dissipates a total of 4.5 Watts of power during normal.This description is written by DDS Automation .